ACRS Certificates

Manufacturers of Structural Steel Hot Rolled Plates & Slabs
to AS/NZS 3678

Current Certificate holders are as follows (click on the certificate numbers to see Scope of Certification details)

NOTES
  1. All certificates are current for the Calendar year, 1 January to 31 December.
  2. An ACRS Certificate is the statement of conformity issued by the Authority which attests that the Firm named on the Certificate below:
    a) conforms to the Scheme Rules and relevant Product Requirements; and
    b) is subject to Evaluation by the Authority.
  3. Please note, ACRS certificates may be updated from time to time. All ACRS certificates are therefore uncontrolled when printed, or downloaded. Always check the scope and detail of an ACRS certificate by viewing it from this site.
  4. If you have any questions regarding ACRS certificates, please contact ACRS office.

There are three classes of ACRS Certificate that may be displayed on this page: Producer Certificates, Technical Approval Certificates, and Non-Producer Certificates.

A Producer Certificate is issued for the listed Scheme Approved Materials currently produced by the Certified Firm and supplied to an AS/NZS or other published Standard.
A Technical Approval Certificate is issued by the Authority for Scheme Approved Materials supplied to a technical specification not otherwise eligible for a Producer Certificate to provide information on the technical evaluation of the performance of the manufacturer’s product or kit listed on the Certificate.
A Non-Producer Certificate is issued by the Authority where the listed Assessable Materials are not currently produced by the Certified Firm, for Approval by the Authority. Such materials will be subject to review by the Authority and issue of a Producer Certificate before any recommencement of supply by the Certified Firm.

Please refer to the ACRS Product Scheme Rules (ADM 002) and List of Applicable Product Requirements (ADM 002-01) for full details (available on this website).
Company Location City/State Country Status Date Certificate Type Tag Marking
BlueScope Steel Port Kembla Plate Mill  Port Kembla  NSW  Australia  Certified  06/08/2012  120802 Product- AS/NZS 
New Zealand Steel  Glenbrook    New Zealand  Certified  17/12/2014  141201 Product- AS/NZS 
Hyundai Steel  Dangjin-shi  Chungnam  South Korea  Certified  30/11/2016  161103 Product- AS/NZS 
POSCO    Gwangyang-si   Korea   Certified  06/06/2017  170702 Product- AS/NZS 
Gunung Raja Paksi  Cikarang Barat  Bekasi  Indonesia  Certified  05/12/2017  171202 Product- AS/NZS 
JFE Steel East (Keihin)    Kanagawa Prefecture  Japan  Certified  07/06/2019  190501 Product- AS/NZS 
Pt Krakatau Posco  Cilegon  Banten  Indonedia  Certified  07/06/2019  190503 Product -Technical Approval 
POSCO  Pohang Works    South Korea  Certified  19/07/2019  190705 Product- AS/NZS 

jas-anz

About ACRS

The Australasian Certification Authority for Reinforcing and Structural Steels (“ACRS”) owns and administers three consumer-oriented, independent, expert, not-for-profit, third-party steel certification schemes: Product Conformity, Product Traceability, and Quality Systems.

Our Contacts

Suite 118, 133 Alexander St
Crows Nest NSW Australia
+61 2 9965 7216
Email: info@steelcertification.com
Post: PO Box 1369 CROWS NEST NSW 1585 AUSTRALIA
ACRS Member Companies

ACRS member companies support and represent a balanced range of interests, including government, specifiers, builders certifiers and suppliers. ACRS members endorse ACRS certification though their organisations and practice.